Polysorb Activated Carbon

• Activated Carbon impregnated into polyester media

• 3, 6, 12, and 16 mm thickness

• Can be used in flat pads, Vee forms and bags

• Wide range of applications

WP Filters

Extended Surface Activated Carbon Filters

• Activated Carbon impregnated into polyester media

• 50, 100 and 150 mm thickness

• Wide range of applications

Camsorb CH Filters

Loose-Fill V-Cell Sorbent Panel Cartridge Filter With Header

• Lightweight and compact honeycomb panels containing the sorbent media, mounted in a plastic frame for easy installation and disposal
• • Nominal 20 mm mounting header
• • Low resistance to airflow
• • 65% initial mechanical removal efficiency.

City-Carb Filters

Citycarb is a versatile, high efficiency combination filter (particle and molecular) to address IAQ issues in public and commercial buildings. This filter will satisfy demands to tackle odour nuisance and provide occupants with the highest level of indoor air quality as set out in the European Standard EN13779. The material selection and construction method ensures that Citycarb is a clean and light filter, that is very quick and easy to maintain.

• Application: Pleated media panels in a rigid plastic frame.
• Frame: Polypropylene
  
• Media:Synthetic fibres with very high quality activated carbon
  
• Maximum flow rate: 4000 m3/hr
  
• Mounting method: Universal Camfil Farr front access frame

City-Flo Filters

Cityflo is a versatile, high efficiency, bag type combination filter (particle and molecular) to address IAQ issues in public and commercial buildings. This filter will satisfy demands to provide occupants with the highest level of indoor air quality as set out in the European Standard EN13779.

• Application: Any IAQ application in a public or commercial building
• Description: Combination media pockets on a rigid header frame
• Frame: Galvanised steel
• Media: Glass fibre with separate layer of very high quality activated carbon media
• Maximum flow rate: 3400 m3/hr
• Mounting method: Universal Camfil Farr front access frame

City-Sorb Filters

Citysorb is a high efficiency compact molecular filter to address IAQ issues in public and commercial buildings. This filter will satisfy demands to tackle odour nuisance and provide occupants with the highest level of indoor air quality as set out in the European Standard EN13779. The material selection and construction method ensures that Citycarb is a clean and light filter that is very quick and easy to maintain.

• Application: Any IAQ application in a public or commercial building where adequate particle filtration exists
• Description: Pleated media panels in a rigid plastic frame
• Frame: Polypropylene
  
• Media: Synthetic fibres with very high quality activated carbon
  
• Maximum flow rate: 4000 m3/hr
  
• Mounting method: Universal Camfil Farr front access frame

Cam-Carb Cylinders

Camcarb Metal is an extremely versatile, high performance molecular filter for use in many process and comfort ventilation applications. The cylindrical geometry results in an extremely even airflow distribution throughout the entire filter and this ensures the longest possible lifetime for the media. The Camcarb filter can be filled with different molecular filtration medias to suit individual applications.

Application: Control of odours, and VOCs, corrosive gases and irritants in most process and comfort ventilation applications
Frame: Galvanised carbon steel
Media: Pelletised / granular activated carbon or Campure media
Maximum flow rate: Depends on number and size of panels
Mounting method: Camsure panels may be mounted in front or side access housings in any duct or ventilation system

Campure GDM 300

GDM 300 filters are Vee-form molecular filtration modules that are filled with various medias from the Campure range. GDM 300 filters are principally used to control acidic gases in pulp and paper, petrochemical and other industrial facilities. They are used in museums and art galleries to control the corrosive gases emitted in vehicle exhausts.

• Frame: HIPS.
  
• Media: Campure media or other pelletised / granular media
  
• Maximum flow rate: 1620 m3/hr (GDM 300-F unit: 600 x 300 x 300 nominal)
  
• Mounting method: Campure GDMs may be mounted in front or side access housings in any duct or ventilation system

Campure GDM 440

GDM 440 filters are Vee-form molecular filtration modules that are filled with various medias from the Campure range. GDM 440 filters are principally used to control acidic gases in pulp and paper, petrochemical and other industrial facilities. They are used in museums and art galleries to control the corrosive gases emitted in vehicle exhausts.

• Frame: HIPS.
  
• Media: Campure media or other pelletised / granular media
  
• Maximum flow rate: 810 m3/hr (GDM 440-F unit:  600 x 150 x 440 nominal)
  
• Mounting method: Campure GDMs may be mounted in front or side access housings in any duct or ventilation system